Draft genome sequence of Magnusiomyces sp. LA-1 isolated from a C6-C8 acid-producing bioreactor.

Here, we report the draft genome of Magnusiomyces sp. LA-1, which was isolated from a C6-C8 carboxylic acid-producing bioreactor. The draft genome of Magnusiomyces sp. LA-1 is 19,829,165 bp in length, is divided into six contigs that comprise 6,557 CDS regions, and has a GC content of 34.5%.

Dissolution Behavior of Fluoroalkylated Diazonaphthoquinone and Its Blends with Fluorinated Copolymers under UV Irradiation.

This article reports on the synthesis of materials containing both a fluoroalkyl group and a diazonaphthoquinone (DNQ) moiety as well as the fabrication of negative- and positive-tone stencil patterns. Additionally, the photoreaction mechanism that contributes to the pattern formation process is discussed, and the application of these materials is explored in the pixel-formation process in organic light-emitting diode (OLED) displays. Fluoroalkylated diazonaphthoquinone (RF2D1) was synthesized using chemically binding a DNQ unit, which can be converted into carboxylic acid derivatives having stronger polarity, with two fluorinated alkyl chains. The purified compound is found to be soluble in a nonpolar fluorous solvent and can be uniformly coated as a thin film. When the thin film of RF2D1 is exposed to 365 nm UV light, its solubility in a fluorous solvent decreases due to the Wolff rearrangement and subsequent hydrolysis of a ketene moiety. In contrast, when a mixture of RF2D1 and a hydrophobic, fluorinated copolymer is tested for the patterning process, the copolymer delays the conversion of the ketene intermediate to carboxylic acid, resulting in the dissolution of the exposed areas in the fluorous solvent. Finally, the applicability of these materials in micropatterning is demonstrated by adopting them in the orthogonal photolithography process to create pixels of OLEDs.

Complete Genome Sequence of Bacillus sp. Strain KICET-1, Isolated from Soybean Paste (Doenjang).

Bacillus sp. strain KICET-1, a bacterium isolated from traditional Korean soybean paste (Doenjang) at Osong, has one 4,099,652-bp DNA chromosome. The G+C content is 46.1%, and KICET-1 shares 99.64% similarity with Bacillus velezensis CR-502T (AY603658), according to phylogenetic classification based on 16S rRNA gene sequences.

Self-Assembly Behavior of Elastin-like Polypeptide Diblock Copolymers Containing a Charged Moiety.

Elastin-like polypeptides (ELPs) are stimulus-responsive protein-based biopolymers, and some ELP block copolymers can assemble into spherical nanoparticles with thermosensitivity. In this study, two different ELP diblock copolymers, each composed of a hydrophobic and a charged moiety, were synthesized, and the dependence of their physical properties on pH, temperature, and salt concentration was investigated. A series of analyses revealed that hydrophobic core micelles could be generated in response to a change in their surroundings and that micelles did not self-aggregate, a phenomenon due to the repulsive forces between like-charged molecules on the surface. We also demonstrated that self-assembly behavior was closely dependent on the character of the charged amino acid and the specific anion in solution.

Thermal characteristics and cadmium binding behavior of EC-ELP fusion polypeptides.

Elastin-like polypeptides (ELPs) are stimulus-responsive protein-based biopolymers that exhibit phase transition behavior. By joining them to synthetic phytochelatin (EC), EC-ELP fusion proteins with temperature sensitivity and metal-binding functionality were generated to remove heavy metal ions biologically. Three different EC domains (EC10, EC20, EC30) were incorporated into the ELP, and the EC-ELP fusion proteins were expressed in E. coli. Their thermal properties and metal binding abilities were then investigated according to the EC length. In addition, the feasibility of reusing EC-ELPs and the cadmium ion binding affinity of reused EC-ELPs were explored.

Separation efficiency of free-solution conjugated electrophoresis with drag-tags incorporating a synthetic amino acid.

DNA sequencing or separation by conventional capillary electrophoresis with a polymer matrix has some inherent drawbacks, such as the expense of polymer matrix and limitations in sequencing read length. As DNA fragments have a linear charge-to-friction ratio in free solution, DNA fragments cannot be separated by size. However, size-based separation of DNA is possible in free-solution conjugate electrophoresis (FSCE) if a "drag-tag" is attached to DNA fragments because the tag breaks the linear charge-to-friction scaling. Although several previous studies have demonstrated the feasibility of DNA separation by free-solution conjugated electrophoresis, generation of a monodisperse drag-tag and identification of a strong, site-specific conjugation method between a DNA fragment and a drag-tag are challenges that still remain. In this study, we demonstrate an efficient FSCE method by conjugating a biologically synthesized elastin-like polypeptide (ELP) and green fluorescent protein (GFP) to DNA fragments. In addition, to produce strong and site-specific conjugation, a methionine residue in drag-tags is replaced with homopropargylglycine (Hpg), which can be conjugated specifically to a DNA fragment with an azide site.

Increased 2,3-butanediol production by changing codon usages in Escherichia coli.

The natural microorganism Escherichia coli without modification is not suitable for the efficient production of 2,3-butanediol (2,3-BD) on an industrial scale because of its poor metabolic performance. Metabolic capacities of E. coli have been improved to produce 2,3-BD efficiently, the performance of which is possible for producing such a product. Codon optimization with the ribosome-binding site for the efficient production of target genes (budA and budC) was achieved by molecular engineering, which allowed the metabolic engineering to proceed to the next level. As a result, comparing the productivity in 26 H, where the amount of p18COR was 1.04 g/L and that of p18WTR was 0.41 g/L, represents an approximate 60.6% increase in the productivity of the p18WTR with codon optimization. In other words, p18COR was 2.54-fold greater than p18WTR in the production of 2,3-BD.

Cadmium detection by a thermally responsive elastin copolymer with metal-binding functionality.

Heavy metals are of great concern to environmental safety because of their adverse effects on the environment and human health, even at very low levels. In particular, cadmium and several cadmium-containing compounds are carcinogens and induce many types of cancer. Biological extracts of cadmium have been given greater attention recently because they are considered to be environmentally benign and economically acceptable. Among promising candidates, one emerging technology is the use of tunable, metal-binding biopolymers based on elastin-like polypeptides (ELPs). An ELP consists of the repeating pentapeptide of specific amino acids, Val-Pro-Gly-Xaa-Gly (where the "guest residue" Xaa is any amino except proline) that undergoes a reversible phase transition at a specific temperature (transition temperature, Tt). However, the ELP itself is relatively non-selective. A biopolymer with metal-binding domains that have stronger affinity, capacity, and selectivity would have distinct advantages. We investigated the use of a new generation of ELP biopolymers, EC18-ELP containing synthetic phytochelatin (EC), which is a metal-binding protein with a repetitive motif (Glu-Cys)nGly, as the metal-binding domain. In this study, an EC18-ELP fusion protein was expressed in Escherichia coli and the metal binding ability of EC to cadmium was examined quantitatively. In addition, transition temperature variation was analyzed when the fusion protein bound to cadmium.

An analysis of the concentration change of intermediate metabolites by gene manipulation in fatty acid biosynthesis.

In this report, concentration of malonic acid and acetic acid produced in Escherichia coli were investigated by the expression of acetyl-CoA carboxylase genes (accs) and a malonyl-CoA:ACP transacylase gene (fabD). Both malonyl-CoA and acetyl-CoA are essential intermediate metabolites in the fatty acid biosynthetic pathway, and are reversibly transformed to malonic acid and acetic acid, respectively in the cell. Acetyl-CoA is converted to malonic-CoA by acetyl-CoA carboxylases (Accs), which are composed of 3 different subunits (AccA, AccB, and AccC), and the resulting malonyl-CoA is then converted to malonyl-[acp] by malonyl-CoA:ACP transacylase (FabD). In this study, these genes were separately cloned, and the influences of overexpression of 4 different genes on the concentration of malonic acid and acetic acid were analyzed. Compared with the wild type E. coli, a recombinant strain containing 3 acc genes together showed a 41.03% enhanced malonic acid production, and a 4.29-fold increased ratio of malonic acid to acetic acid.

Development of Escherichia coli MG1655 strains to produce long chain fatty acids by engineering fatty acid synthesis (FAS) metabolism.

The goal of this research was to develop recombinant Escherichia coli to improve fatty acid synthesis (FAS). Genes encoding acetyl-CoA carboxylase (accA, accB, accC), malonyl-CoA-[acyl-carrier-protein] transacylase (fabD), and acyl-acyl carrier protein thioesterase (EC 3.1.2.14 gene), which are all enzymes that catalyze key steps in the synthesis of fatty acids, were cloned and over-expressed in E. coli MG1655. The acetyl-CoA carboxylase (ACC) enzyme catalyzes the addition of CO(2) to acetyl-CoA to generate malonyl-CoA. The enzyme encoded by the fabD gene converts malonyl-CoA to malonyl-[acp], and the EC 3.1.2.14 gene converts fatty acyl-ACP chains to long chain fatty acids. All the genes except for the EC 3.1.2.14 gene were homologous to E. coli genes and were used to improve the enzymatic activities to over-express components of the FAS pathway through metabolic engineering. All recombinant E. coli MG1655 strains containing various gene combinations were developed using the pTrc99A expression vector. To observe changes in metabolism, the in vitro metabolites and fatty acids produced by the recombinants were analyzed. The fatty acids (C16) from recombinant strains were produced 1.23-2.41 times higher than that from the wild type.

Electrospun nanofibrous scaffolds for controlled release of adeno-associated viral vectors.

The integration of viral gene delivery with key features of biomaterial scaffolds that modulate viral delivery in a controlled manner offers a promising strategy for numerous tissue engineering applications. In this study adeno-associated virus (AAV), which is widely utilized in human gene therapy as a gene carrier due to its safety and efficient gene delivery capability, was encapsulated within electrospun nanofibrous scaffolds composed of blended mixtures of elastin-like polypeptides (ELP) and poly (ε-caprolactone) (PCL) and was employed to transduce fibroblasts adherent on the scaffolds. Combinatorial interactions between ELP and PCL chains upon physical blending significantly altered the mechanical properties (i.e. wettability, elastic modulus, strain, etc.) of the ELP/PCL composites, thus providing key tools to mediate controlled release of AAV vectors and robust cellular transduction on the fibrous scaffolds. The ability of ELP/PCL composites to manipulate the controlled release of AAV-mediated gene delivery for subsequent high-efficiency cellular transduction will provide tremendous opportunities for a variety of tissue engineering applications.

A new cloning strategy for generating multiple repeats of a repetitive polypeptide based on non-template PCR.

A new cloning method for generating multiple repeats of amino acids is described which can be used as biomaterials, protein polymers and biomedical applications. Although several traditional methods for cloning multiple repeats are still exploited, these are laborious and complicated because they must go through several consecutive cloning steps. To solve these problems, synthetic gene libraries encoding repetitive patterns were constructed by using non-template PCR. As a result, a 'length library' with fourteen different ELP repeating genes was constructed and expressed in a cell-free protein synthesis system. These results showed our novel cloning method is efficient, and has the potential capacity for synthesizing repetitive genes by PCR to be cloned in any commercial expression vectors.

The effects of supplementing specific amino acids on the expression of elastin-like polypeptides (ELPs).

Elastin-like polypeptides (ELPs) made from the repeating pentapeptides (Val-Pro-Gly-Xaa-Gly) are protein based biopolymers that contain useful properties, including the ability to self-assemble, biocompatibility, and stimuli sensitivity. However, due to the repeated consumption of specific amino acids, long ELPs generally have low expression yields in in vitro and in vivo systems. This is because of the lack of specific amino acids during the translation process. In this study, ELP fusion proteins of various lengths were prepared by recursive directional ligation (RDL) and expressed in a cell-free protein synthesis system. By measuring TCA-precipitated radioactivity with a liquid scintillation counter, their expression profiles were investigated. The expression levels of an ELP fusion protein were improved by almost 2-fold by adding specific amino acids. Additionally, we determined that the amount of increase in expression levels depends on the length of the ELPs. This study suggests a useful strategy to improve the yield of longer repetitive polypeptides such as ELPs or silk-like polypeptides (SLPs).

Sequencing of DNA by free-solution capillary electrophoresis using a genetically engineered protein polymer drag-tag.

We demonstrate the first use of a non-natural, genetically engineered protein polymer drag-tag to sequence DNA fragments by end-labeled free-solution electrophoresis (ELFSE). Fluorescently labeled DNA fragments resulting from the Sanger cycle sequencing reaction were separated by free-solution capillary electrophoresis, with much higher resolution and cleaner results than previously reported for this technique. With ELFSE, size-based separation of DNA in the absence of a sieving matrix is enabled by the end-on attachment of a polymeric "drag-tag" that modifies the charge-to-friction ratio of DNA in a size-dependent fashion. Progress in ELFSE separations has previously been limited by the lack of suitable large, monodisperse drag-tags. To address this problem, we designed, constructed, cloned, expressed, and purified a non-natural, genetically engineered 127mer protein polymer for use as an ELFSE drag-tag. The Sanger cycle sequencing reaction is performed with the drag-tag covalently attached to the sequencing primer, a major advance over previous strategies for ELFSE sequencing. The electrophoretic separation is diffusion-limited, without significant adsorption of the drag-tag to capillary walls. Although the read length (at about 180 bases) is still short, our results provide evidence that larger protein polymer drag-tags, currently under development, could extend the read length of ELFSE to more competitive levels. ELFSE offers the possibility of very rapid DNA sequencing separations without any of the difficulties associated with viscous polymeric sieving networks and hence will be amenable to implementation in microchannel and chip-based electrophoresis systems.

Multiplexed p53 mutation detection by free-solution conjugate microchannel electrophoresis with polyamide drag-tags.

We report a new, bioconjugate approach to performing highly multiplexed single-base extension (SBE) assays, which we demonstrate by genotyping a large panel of point mutants in exons 5-9 of the p53 gene. A series of monodisperse polyamide "drag-tags" was created using both chemical and biological synthesis and used to achieve the high-resolution separation of genotyping reaction products by microchannel electrophoresis without a polymeric sieving matrix. A highly multiplexed SBE reaction was performed in which 16 unique drag-tagged primers simultaneously probe 16 p53 gene loci, with an abbreviated thermal cycling protocol of only 9 min. The drag-tagged SBE products were rapidly separated by free-solution conjugate electrophoresis (FSCE) in both capillaries and microfluidic chips with genotyping accuracy in excess of 96%. The separation requires less than 70 s in a glass microfluidic chip, or about 20 min in a commercial capillary array sequencing instrument. Compared to gel electrophoresis, FSCE offers greater freedom in the design of SBE primers by essentially decoupling the length of the primer and the electrophoretic mobility of the genotyping products. FSCE also presents new possibilities for the facile implementation of SBE on integrated microfluidic electrophoresis devices for rapid, high-throughput genetic mutation detection or SNP scoring.

Free-solution electrophoresis of DNA modified with drag-tags at both ends.

In end-labeled free-solution electrophoresis (ELFSE), DNA molecules are labeled with a frictional modifier or "drag-tag", allowing their size-based electrophoretic separation in free solution. Among the interesting observations from early work with dsDNA using streptavidin as a drag-tag was that the drag induced by including a streptavidin label at both ends was significantly more than double that from a single streptavidin (Heller, C. et al.., J. Chromatogr. A 1998, 806, 113-121). This finding was assumed to be in error, and subsequent work focused on experiments in which only a single drag-tag is appended to one end of the DNA molecule. Recent theoretical work (McCormick, L. C., Slater, G. W., Electrophoresis 2005, 26, 1659-1667) has examined the contribution of end-effects to the free-solution electrophoretic mobility of charged-uncharged polymer conjugates, reopening the question of enhanced drag from placing a drag-tag at both ends. In this study, this effect is investigated experimentally, using custom-synthesized ssDNA oligonucleotides allowing the attachment of drag-tags to one or both ends, as well as dsDNA PCR products generated with primers appropriate for the attachment of drag-tags at one or both ends. A range of sizes of drag-tags are used, including synthetic polypeptoid drag-tags as well as genetically engineered protein polymer drag-tags. The enhanced drag arising from labeling both ends has been confirmed, with 6-9% additional drag for the ssDNA and 10-23% additional drag for the dsDNA arising from labeling both ends than would be expected from simply doubling the size of the drag-tag at one end. The experimental results for ssDNA labeled at both ends are compared to the predictions of the recent theory of end-effects, with reasonably good quantitative agreement. These experimental findings demonstrate the feasibility of enhancing ELFSE separations by labeling both ends of the DNA molecule, leading to greater resolving power and a wider range of applications for this technique.

Comblike, monodisperse polypeptoid drag-tags for DNA separations by end-labeled free-solution electrophoresis (ELFSE).

The development of innovative technologies designed to reduce the cost and increase the throughput of DNA separations continues to be important for large-scale sequencing and genotyping efforts. We report research aimed at the further development of a free-solution bioconjugate method of DNA size separation by capillary electrophoresis (CE), in particular, the determination of an optimal molecular architecture for polyamide-based "drag-tags". We synthesized several branched poly(N-methoxyethyl glycine)s (poly(NMEG)s, a class of polypeptoids) as novel friction-generating entities for end-on attachment to DNA molecules. A 30-mer poly(NMEG) "backbone," comprising five evenly spaced reactive epsilon-amino groups, was synthesized on solid phase, cleaved, and purified to monodispersity by RP-HPLC. Three different comblike derivatives of this backbone molecule were created by (1) acetylating the epsilon-amino groups or (2) appending small, monodisperse NMEG oligomers (a tetramer and an octamer). Grafting of the oligo(NMEG)s was done using solution-phase amide bond formation chemistry. Once purified to total monodispersity, the three different drag-tags were studied by free-solution electrophoresis to observe the effect of branching on their hydrodynamic drag or "alpha" and hence their ability to separate DNA. Drag was found to scale linearly with total molecular weight, regardless of branch length. The octamer-branched drag-tag-DNA conjugate was used to separate ssDNA products of 50, 75, 100, and 150 bases in length by free-solution CE in less than 10 min. Hence, the use of branched or comblike drag-tags is both a feasible and an effective way to achieve high frictional drag, allowing the high-resolution separation of relatively large DNA molecules by free-solution CE without the need to synthesize very long polymers.

Protein polymer drag-tags for DNA separations by end-labeled free-solution electrophoresis.

We demonstrate the feasibility of end-labeled free-solution electrophoresis (ELFSE) separation of DNA using genetically engineered protein polymers as drag-tags. Protein polymers are promising candidates for ELFSE drag-tags because their sequences and lengths are controllable not only to generate monodisperse polymers with high frictional drag, but also to meet other drag-tag requirements for high-resolution separations by microchannel electrophoresis. A series of repetitive polypeptides was designed, expressed in Escherichia coli, and purified. By performing an end-on conjugation of the protein polymers to a fluorescently labeled DNA oligomer (22 bases) and analyzing the electrophoretic mobilities of the conjugate molecules by free-solution capillary electrophoresis (CE), effects of the size and charge of the protein polymer drag-tags were investigated. In addition, the electrophoretic behavior of bioconjugates comprising relatively long DNA fragments (108 and 208 bases) and attached to uncharged drag-tags was observed, by conjugating fluorescently labeled polymerase chain reaction (PCR) products to charge-neutral protein polymers, and analyzing via CE. We calculated the amount of friction generated by the various drag-tags, and estimated the potential read-lengths that could be obtained if these drag-tags were used for DNA sequencing in our current system. The results of these studies indicate that larger and uncharged drag-tags will have the best DNA-resolving capability for ELFSE separations, and that theoretically, up to 233 DNA bases could be sequenced using one of the protein polymer drag-tags we produced, which is electrostatically neutral with a chain length of 337 amino acids. We also show that denatured (unfolded) polypeptide chains impose much greater frictional drag per unit molecular weight than folded proteins, such as streptavidin, which has been used as a drag-tag before.